Help!
Ok its been a while since I have needed to use this disk but i have an issue with an HP Z400 and xms errors and B57 drivers

I belive I have sorted the xms errors using the workaround of himem.sys from dos 6.22 as shown in this forum
but I am still having issues with the nic card not being detected and it not even working with Manual detection .......
I have made cabs from the latest ndis driver from broadcom and I will try to attach (.cab to .zip for upload purposes)
If some one could look and tell me what I am doing wrong it would be very helpful

Dangerous

I think this is me being thick - Do I need .pci file ? I think yes ! the cab I have 1. has no pci file 2.only a small amount of device in

anyone got updated pci files ????

Think I am getting there need to try in work tomorrow
my ndis.pci file now looks like this

ret="B57"
ven=14E4 "Broadcom"
dev=1645 "NetXtreme Gigabit Ethernet (BCM5701)"
0201 "Broadcom USB iLine10™ Network Adapter Broadcom Corporation"
1006 "Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet3Com Corporation"
14E4 "802.11b/g Wireless Lan Controller Broadcom Corporation"
1600 "NetXtreme BCM5752 Gigabit Ethernet PCI Express Broadcom Corporation"
1644 "NetXtreme Gigabit Etherent (BCM5700/5401)"
1645 "broadtcomBCM5701 Gigabit Ethernet Broadcom Corporation"
1646 "NetXtreme Gigabit Ethernet (BCM5702 10/100/1000)"
1647 "NetXtreme Gigabit Ethernet (BCM5703 10/100/1000)"
1648 "NetXtreme Gigabit Ethernet (BCM5704C 10/100/1000)"
164D "NetXtreme Gigabit Ethernet (BCM5702FE 10/100)"
1653 "NetXtreme Gigabit Ethernet (BCM5705 10/100/1000)"
1654 "NetXtreme Gigabit Ethernet (BCM5705 10/100/1000)"
1658 "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
1659 "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
165A "Broadcom NetXtreme BCM5722 Gigabit Broadcom"
165D "NetXtreme Gigabit Ethernet (BCM5705M 10/100/1000)"
165E "NetXtreme Gigabit Ethernet (BCM5705M 10/100/1000)"
166a "Broadcom NetXtreme Gigabit Ethernet 5780 Broadcom Corporation"
166B "NetXtreme Gigabit Ethernet Broadcom Corporation"
166D "NetXtreme Gigabit Ethernet (BCM5705MFE 10/100)"
166E "NetXtreme Gigabit Ethernet (BCM5705 10/100/1000)"
167 "NetXtreme Fast Ethernet Controller Broadcom Corporation"
1672 "NetXtreme Gigabit Ethernet Broadcom Corporation"
1673 "NetXtreme Gigabit Ethernet Broadcom Corporation"
1676 "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
1677 "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
167A "Broadcom NetXtreme Gigabit Ethernet ControllerBroadcom Corporation"
167B "NetXtreme Gigabit Ethernet Broadcom Corporation"
167C "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
167D "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
167E "NetXtreme Gigabit Ethernet (BCM5750 10/100/1000)"
1684 "Broadcom NetXtreme Gigabit Ethernet Broadcom Corporation"
1693 "Ethernet Controller Broadcom Netlink Gigabit Broadcom Corporation"
1696 "NetXtreme Gigabit Ethernet (BCM5782 10/100/1000)"
1698 "NetLink Broadcom Corporation"
169A "NetXtreme Gigabit Ethernet Broadcom Corporation"
169B "NetXtreme Gigabit Ethernet Broadcom Corporation"
169C "NetXtreme Gigabit Ethernet (BCM5788 10/100/1000)"
169D "NetXtreme Gigabit Ethernet (BCM5789 10/100/1000)"
169E "NetXtreme Gigabit Ethernet PCI Express Broadcom Corporation"
16A6 "NetXtreme Gigabit Ethernet (BCM5702 10/100/1000)"
16A7 "NetXtreme Gigabit Ethernet (BCM5703X)"
16A8 "NetXtreme Gigabit Ethernet (BCM5704 10/100/1000)"
16C6 "NetXtreme Gigabit Ethernet (BCM5702 10/100/1000)"
16C7 "NetXtreme Gigabit Ethernet (BCM5703 10/100/1000)"
16DD "NetXtreme Gigabit Ethernet Broadcom Corporation"
16f7 "NetXtreme BCM5753 Gigabit PCI Express Broadcom Corporation"
16FD "NetXtreme Gigabit Ethernet PciXpress Broadcom Corporation"
16FE "NetXtreme Gigabit Ethernet Broadcom Corporation"
170D "NetXtreme Gigabit Ethernet (BCM5901 10/100/1000)"
170E "NetXtreme Gigabit Ethernet (BCM5901 10/100/1000)"
7321 "network card integrated Broadcom Corporation"

Progress I think
The boot disk now "detects" the nic card
but when trying to pick up the ip the following error occurs "not enough memory" and then fails
but if i run ipconfig it has picked up an ipaddress??????????
(using himem.sys from dos 6.22)
anyone any ideas ?

Hey i have found the solution.. find a new dos.pci from broadcoms homepage. then it works.