First of all, sorry about my english !

My problems : - all of them with the same CD, of course -

1.- testing PEBuilder on Compag EVO D510
Boot on CD OK, messsage "Starting BartPE..." on the screen OK, but no progress bar and after some minutes I have this message :
"File \i386\system32\ntkrnlmp.exe could not be loaded
The error code is 1024
Setup cannot continue. Press any key to exit"

2.- Next test : testing PEBuilder on HP EVO D530 S
Boot on CD OK, messsage "Starting BartPE..." on the screen OK, progress bar OK (but very, very slowly) and, at the end et before any blue screen I have this message :
"STOP : c0000221 {Bad Image Checksum}
The image olesvr32.dll is possibly corrupt. The header checksum does not match the computed checksum."

3.- Next test : testing PEBuilder on HP Vectra VL 400 DT
Boot on CD OK - CD LED goes on - but black screen. Nothing on the screen
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Infos :

PEBuilber 3.0.26 built on Compaq EVO D510 (Windows 2000 SP 4)
PEBuilder built with CD Windows 2003 English Standard Edition
Some files - network- taken from CD Microsoft Windows PE 1.2
Several plugins mades by me (an editor, some nic drivers, some raid drivers)

Creating ISO image OK, en verbose mode : no errors, no warnings. A priori, all is OK

Testing on my own harddisk - via "pehdinst.cmd -b c:\pebldr" on plugin\pehdinst directory -. A priori, all is OK, all is running perfectly - so my plugins are OK ? -

Burning CD with Easy CD Creator v.4.02E S10 - perhaps le problem is here ?

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
has anybody any idee what is going wrong ?

Thanks.